Custom Search

Friday, January 4, 2008

Flying Toy and Hobby RC Helicopters

Basic Flight Controls for RC Helicopters
In the RC hobby, flying RC helicopters is often considered the hardest RC skill to master. This might make the marketing claims for easy-to-fly toy RC helicopters hard to understand. The difference is in the helicopter design, the controls, and the range of movement that the helicopter is capable of performing.

Hobby-grade RC helicopters are designed to look and operate very much like full-size helicopters. Toy-grade helicopters are configured and operate a little differently. They are designed for more stable flight so that children can more easily use the transmitter and control the flight. These changes mean that the helicopter is not capable of the same speed or maneuvers as hobby-grade helicopters. Both can still be fun to fly.
Controlling RC Helicopters
What you can do with an RC helicopter (such as going up and down) are actions initiated by radio signals from the transmitter.

The number of channels on a transmitter tells you the number of actions that you can control on the RC.

These actions usually involve things like changing the pitch (tilt) of the rotor blades or making the blades spin faster. A hobby-grade RC helicopter normally requires at least four or five channels for normal flight that closely mimics the controls and flight of full-size helicopters. Toy-grade helicopters may have only 2 or 3 channels and much more limited actions.

Flying Toy RC Helicopters
The typical toy heli is a 2- or 3-channel model that can fly up and down, maybe forward and sometimes backward, and go left and right. It may run at a constant speed. It can hover in place but it's probably not going to be able to do high speed chases, loops and rolls, or inverted flight.

In order to provide more stable flight, the tail may not have the familiar tail rotor and blades of real helicopters that are set perpendicular to the main rotor. Instead they often have fixed pitch, counter-rotating dual main rotors (ringed for safety). These rotors eliminate the need for the operator to use tail rotor controls to counteract a natural phenomenom of helicopter flight that makes the body of the helicopter want to spin around and around.

Because the main rotors are fixed pitch (blades don't tilt independently), there are no cyclic controls -- tilting of the main rotor -- for climbing and diving or doing banking turns. Instead, the dual main rotors provide level turning. Some models have a small rotor on the tail (parallel to the main rotors) or vertical rotors in other locations that control forward flight and provides further stability.

These design changes sacrifice some of the maneuverability found in hobby-grade helicopters but it also means that the pilot needs to perform fewer actions to keep the helicopter in flight. Simpler controls, slower speed, and less aerobatics ability makes these toy helicopters easier to fly and provide children and novice pilots with more entertainment value. It doesn't mean that you can master RC helicopter flight right out of the package though. Even with the toy helis it takes patience and practice to hover, fly around the room, and land upright.

Flying Hobby RC Helicopters
With hobby-grade RC helicopters there are many more actions that the pilot can do and needs to perform to keep the helicopter aloft. Variable pitch rotors and other design features allow the helicopters to do more diving, climbing, rolls, and loops in addition to going up and down and hovering. These actions along with adjustable speed make hobby helicopters extremely challenging to fly but also more exciting.

Transmitters for hobby RC helicopters may come with many channels to control basic helicopter functions, provide more precise control of mixed actions, and change settings on the helicopter from a distance; but, for basic flight four or five channels is normal.

RC Heli FAQ

Q: How long do they stay up

A: Normally they can fly 15 to 20 minutes on one tank of gas.

Q: How far do they go

A: They go as far as the transmitter can broadcast, which is about 2 km. They will go very high and far out of sight before the radio looses contact, unless your batteries are low.

Q: How fast do they go

A: Same as a average plane, the record top speed is under 90 mph straight and level (without diving first) I think. Most 30 sized helicopters can do around 40 mph fairly easily.

Q: How much do they weigh

A: Most .30 sized helicopters weigh in around 6 lbs empty (no fuel or electronics)

Q: How much can they lift

A: A entry level (30 size) helicopter can lift 1-2 lbs with a significant performance hit. A typical 60 size can lift 5-8 lbs with a significant performance hit. A specialized 60 with flat bottom blades and designed to lift can lift around 15 lbs.

Q: How fast are the blades moving

A: Most .30 sized helicopters spin their main blades near 1600 rpm for easy flying around, and for sport loops and such closer to 1900 rpm. This calculates to over 200 mph at the blade tips and near 300 lbs of force pulling on the center of the blades. The average .30 engine produces a mean one and a half horsepower.

Q: How much do they cost

A: Starting the hobby from materials and tools, goes about $1000. You can get by with a .30 size helicopter for around $800 complete.

Q: What kind of mechanical experience do you need to build a heli

A: Minimal by , following the directions very closely and double checking everything will seems to have worked.

Q: How long does it take to build

A: About 2 - 3 days. With a pre-built ARF (Almost Ready to Fly) kit like the Raptor, you're only a few hours from ready to hover when you get it in the box.

Q: Are they much harder than planes

A: They are more complicated to fly than airplanes, however it is possible to learn to fly a helicopter by yourself which is next to impossible for an rc airplane because with a helicopter you can fly a little bit, 2 inches off the ground and land safely, but with an airplane it's all or none. Helicopters become more complicated because of the fact that there are more ways to fly them, and thus, more orientations you must get used to.

Q: How do you learn to fly

A: By use of a computer simulator which hooks up to your real transmitter through the trainer interface and large training gear which prevent the helicopter from tipping sideways when learning to hover a few inches above the ground.

Q: Do they run on gas

A: Not so much gasoline, as they do on a liquid fuel made of alcohol and nitro methane. They do make r/c helicopter engines that run on regular gasoline, but they're not as common due to their increased cost, weight, and lower power output. They are however much cheaper to buy gas for and can stay up longer, since the regular 2-stroke model engine gas can cost any where from $13 to $23 depending on the mixture. Model engine fuel (glow fuel) produces more power than conventional gasoline because of the high contests of nitro methane, which is why it is more popular than gasoline for model aircraft.

Q: What kind of engines do they run on

A: Special remote control helicopter engines. They come in 2-stroke and 4-stroke glow burning engines as well as 2 stroke gasoline models. They range in size from .06 cu inches to .91 cubic inches. The most common of these are glow fuel .30 and .60 two stroke engines. The O.S. .32 SXH runs at a peak power RPM of around 18000 RPM with 1.2 horsepower, while the 60 size engines can make 2 to 3 h.p.!

Q: Whats a glow engine

A: An engine that uses a glow plug instead of a spark plug. A glow plug does not require a spark to ignite the next cycle, it has a small coil which remains hot enough to ignite the next cycle when the fuel is compressed in the cylinder head. In order to start the engine, you must use a glow heater which heats the coil in the glow plug like a coil in a light bulb, and once the engine is running it produces enough heat by itself and you remove the glow heater.

Q: What happens when you crash

A: In a light crash (bad bounce) you might break the landing gear and a couple other things, in a average crash (lands on it's side) the first things to go are the main blades, the tail boom, the main shaft, the flybar, possibly the landing gear and the boom supports. Then there are the bad crashes where you look for the parts that aren't broken Wink

Crash Etiquette

While bent over your model tweaking with the needle valve, too often you hear "What the f***...," followed by a low frequency thump. Usually, several expletives will be inserted, some used imaginatively. A hand-crafted masterpiece of airframe miniaturisation crammed with state of the art electronic equipment and powered by an exquisitely machined engine is no more. The pilot, who is frequently the builder/owner, has made an unscheduled landing or has discovered the radio in his hands has a greater range than the eyes in his head.

Your immediate problem is how to react. Generally, it is considered bad form to immediately ask if you may borrow the pilot's glo plug battery. Similarly, you probably shouldn't ask if he's finished with the clip.

Any equipment related reasons for the crash you hear are by definition reasonable. Pilot error is too rare and sensitive to suggest, so don't say, "That's odd, I haven't had any problems on that frequency today," until at least an hour after the crash. Offer to help go look. Don't say, "It sounded like it hit something solid." Note that most lost models are found and returned. Don't ask if he had his name and phone number in the model or wonder out loud if the model hit a house or car.

If it looks like more than enough people have "volunteered" to help with the search, try to weasel out of going. There are ticks and poison ivy out there, and seeing a grown man cry isn't pleasant. If the pilot takes a plastic bag with him or comes back empty handed to get one, assume the worst. Actually, in a really bad crash, two hands and a pocket are enough space for everything worth salvaging.

Whatever you do, don't hold a postmortem on the spot. The pilot probably doesn't want to discuss:

* Battery condition
* Poor construction
* Pilot error
* Used rubber bands
* Fuel tank capacity
* Light blue covering
* Model selection vs. pilot skill

As best you can, avoid specifics, sound supportive, and look appropriately grave. You'll want the same consideration some day.

How to Get Started in RC Night Flying

Before you begin night flying, it is important to understand some basic concepts about how the eye works. I am certainly no optometrist, and I couldn't describe the differences between the cornea and a cone, but I can convey to you what I have learned through experience.

The eye is sensitive to contrast. The greater the contrast between objects, the more detail the eye can discern. That is why it is important to fly only when it is very dark (preferably on a clear, moonless night, away from the city) for your first few flights. This will actually make it easier to see your airplane, because the darker it is, the wider the pupils of your eyes will open, and the easier it will be to see the lights of your aircraft, for they will present a high contrast against the blackness of the sky. Also, it is important to keep in mind that your eyes can take up to 25 minutes (or more) to fully adjust to darkness after being exposed to bright light. The brain works in conjunction with the eye to protect the optic nerve and the retina from over-stimulation, therefore the eye is much quicker to respond when adjusting to light than it is when adjusting to darkness.

Many night flyers will argue that you need intense lights on your airplane to make flying at night possible. While this may be true within one school of thought, I say there is a better, more effective (and efficient) way. It takes a lot of power to generate intense light, and it is unfortunate that many night flyers configure their high power lighting systems in such a way that about 99% of the generated light is wasted!

A good lighting configuration is essential to a successful night flight. Remember that when you fly at night, your perspective will be very different from what you are used to seeing during the day. In the daylight, you can see your entire aircraft. At night, all you can see are the lights that you have on your aircraft. In other words, you don't fly an aircraft at night - instead, you fly a pattern of lights. You have to use some imagination to translate that pattern of lights in the sky into something that resembles your aircraft so that you can determine its orientation.

I have found that the simplest effective lighting configuration consists of four (4) points of reference: wing tips, nose and tail. The wing tip reference lights help you determine the orientation of the aircraft along the roll and yaw axis, whereas the nose and tail reference lights help you determine the orientation of the aircraft along the pitch and yaw axis. The combination of all reference lights forms a sort of "T" pattern, making it relatively easy to judge the orientation of the aircraft. I suggest you start with a simple, effective lighting system until you determine whether you like night flying or not. If you decide to continue, then you can pursue a more elaborate lighting system.

Probably the simplest way to prepare a model airplane for night flying is to purchase some cyalume chemical light sticks and use clear packaging tape or strong rubber bands to affix them to your aircraft. It is important to be able to see the light sticks from most any angle, regardless of the orientation of your aircraft, so the number of light sticks you use may vary depending on your aircraft. I would also suggest you fly a slow-flying trainer type aircraft for your first time up until you get a feel for it. Just like anything, you have to learn to walk before you can run.

It is best to affix a light stick on the very end of each wing on the edge of the wing tip and/or have them protrude from the wing, preferrably toward the nose of the aircraft. This gives them maximum visibility from above and below, and also allows them to be visible from the front and sides. You will need visibility from the front for when it comes time to make your landing approach. It has been my experience that the orientation in which the plane is least visible at night is when it is coming directly toward me. Therefore, all of my lighting configurations include some forward-facing wing tip lights and a light in the nose. I might also suggest that you use a different color light stick on each wing tip (traditionally, red on the left and green on the right). This will help eliminate disorientation problems that accompany certain aircraft positions.

The lights in the nose and tail should be visible from above and below as well. You might think at first that you would only really need to light up the bottom of the aircraft, since one has to look up to see the airplane. However, the top of the airplane is actually visible perhaps more of the time than the bottom, since it tends to bank toward the flight line when making turns around the field. The bottom really is only visible when flying overhead. But it is necessary to be able to see both the top and the bottom of the aircraft. Therefore, there is a good chance you will need two light sticks in the nose. You can generally get by with only one on the tail if it is mounted vertically up high on the fin.

I cannot fully emphasize the importance of being familiar with the plane you want to fly at night. The more comfortable you are flying it during the day, the easier it will be to make the transition into the night. But don't be fooled by your confidence. No matter how well you feel you know your aircraft - no matter how long you have been flying it - it will be a different experience flying it at night for the first time. Do not plan to do anything fancy during your first few flights, because your first few flights will be used to learn some new skills (or at least sharpen ones you already have). On my first night flight, I flew a plane that I had been flying for many years. Taking it up at night seemed almost natural. But that's only because I was already so familiar with the aircraft that I knew what to expect and could accurately predict its movements and orientation. However, on that first night, I felt confident enough to attempt a loop. That's when I learned just how different night flying was. I almost lost my airplane, because the lights fooled me and I lost my perspective of the plane's orientation (mostly because both wings were the same color). I gave it quite a few incorrect control inputs before I regained perspective and recovered. I did nothing more than fly around in circles after that.

Probably the most important thing you can do before making your first flight at night would be to relax, close your eyes, and imagine your first flight. Plan your flight so you know exactly what you are going to do, and don't plan to do anything more than take off, fly around in circles, and land. That will be enough for your first flight. The objective of your first flight should be to become familiar with how your plane looks in the sky, and how the pattern of lights can play tricks on you in certain orientations. The important thing is to remain calm. Be as aware as you can be of the orientation and direction of the plane. If you lose perspective, the disorientation should be only temporary - watch the plane come around until you can identify its orientation in a new position before issuing additional control inputs.

It also helps immensely to have someone with good eyesight stand next to you to help talk you through any disorientation you may experience. An extra pair of hands is also helpful when preparing your aircraft for flight. Chances are, you will need a flashlight or some source of light to use while refueling and starting your engine. If you have an assistant, have him or her hold your plane for a few minutes when it is ready to launch, to give you a chance to close your eyes and allow them to adjust to the darkness after having been exposed to the light in the pits. When you're ready, give the signal to launch, and enjoy the ride!

Perhaps I should have mentioned before this point that once you get the aircraft into the air, there will certainly come a time when you will have to bring it back down to the ground. Landing is probably the most difficult night flying maneuver, especially if you cannot see the runway. Before flying at night, you should have a good mental picture of the runway as it looks during the day. Pay close attention to how your plane looks on approach, touch down, and taxiing on the runway during the day. This will be of some benefit to you in the dark, especially if you stand in the same place to fly at night as you do during the day.

Aside from having a mental picture of the runway, it is good to have some reference of where the runway is at night in case you tend to turn or wander from your post while you fly. Some night flying enthusiasts may argue that you need to be able to see the runway in order to land. I have heard some amazing stories related to this. One in particular involved lining up ten automobiles with their headlights on just to light up the runway. This, to me, is ludicrous. Pardon the judgement, but ten automobiles lined up on the flight line is overkill, not to mention inefficient! It could also present itself as a safety hazard, creating lighting conditions that could interfere with the pilot's ability to see in the dark.

My experience has demonstrated that one does not need to be able to see the runway in order to land, any more than one needs to be able to see the airplane in order to fly at night. If you can fly by lights, you can land by lights. Therefore, all you need are a few (or just a couple) reference lights on the runway to let you know where the sky ends and the ground begins. Probably the simplest way to add reference lights to the runway would be to crack a couple chemical light sticks and toss them out on the ends (or wherever they work best for you). A friend of mine uses a couple of homemade lights consisting of a few LEDs and some old rechargeable NiCd batteries, providing just enough light to mark the runway, and they last all night long!

Chemical light sticks have a relatively short usable life span, but they should be adequate enough to get you through your first night flying experience. And don't push it! If you notice the light begin to diminish in the light sticks, making it even a little difficult to see your plane from a distance, then it's either time to land the plane and go home, or put on some fresh lights.

Flying with light sticks is not the best way to fly at night, but it is probably the simplest. Unless you happen to know someone who flies at night and can quickly rig up a lighting system for you to try out, using light sticks is a good quick-start approach to use. The ideal situation would be to fly with an experienced night flyer who has a proven lighting design and who would be willing to let you fly his plane (just make sure you fly the plane during the day to become familiar with it).

Your success and enjoyment with night flying will be solely up to you. Relax, have fun, and progress at a natural rate. Don't try to push it. There are a number of safety considerations to keep in mind while flying at night that you may not have considered in your daytime flying. If you are sensible, reasonable and patient, you can expect to be flying happily at night long into the future.

Thursday, January 3, 2008

It been a long long while since making a post. Marking the beginning of 2008 will be a series of Montages of my collection of RC Planes, Heli, Cars and etc all the way back as far as my memories recall and photos are still available.

Saturday, June 16, 2007

BlueBird Servos Comparison with Hitec & Futaba

For a more economical, high performance, high quality & good after sales support Servos check out BlueBird Technology Servos at www.zhobbyshop.com.

See how our BlueBird Servos compare to other brands in performance. Most importantly, check out it attractive price at www.zhobbyshop.com.

Powered By Blogger